Set home|Favorites|Chinese
 
You're here:Home-Product 

Name:  Single screw and barrel of extruder machine001 

       Detail:

Single screw and barrel of extruder machine

Standards

Diameter:φ15-φ300

Ratio of Length to Diameter :1555

 

Material:

Alloy-Steel of High-quality

(1) 38CrMoAlA (JIS SACM645)

(2) 42CrMo (AISI 4140)      

(3) 4Cr5MoSiV1 (JIS SKD-61)

 

Heat-treatment:

(1)       Nitriding treatment

(2)       Electroplated hard-chrome

(3)       High-frequency quenching

(4)       Spray coating Bimetallic-alloy

(5)       Vacuum quenching

 

Main technical specifications::

Technical: Nitriding treatment, alloy coating spraying, heating treatment, screw fully hardening,

Hardness After Hardening & Tempering : 240-280 HV

Nitrided Hardness : 900-1020 HV

Nitrided Case Depth: 0. 5~0.8mm

Nitrided Brittleness: Less Than Grade 2

Surface Roughness: Ra 0.4um/m

Screw Straightness: 0.015mm/m

Surface Chromium-Plating''s Hardness After Nitriding:900HV

Chromium-Plating Depth: 0.05~0.10mm

Alloy Hardness: HRC50°-65°

Alloy Depth: 0.8~2.0mm

Screw can be selected from ordinary,gradual,mutational,pinned,shielding,separating and exhausting types.

The compression ratio of screw can be desingned according to different raw material-s and requirements of clients.


【Close】

Tel:0086-580-8051984
Fax:0086-580-8051984
Mobile:0086-0-13857235230
E-mail:13429258869@139.com
 
All Rights Reserved Zhoushan Dinghai Lucheng Screw Machinery Factory
Address:Xihou Industrial Zone, Jintang,Dinghai,Zhoushan city,Zhejiang province,China | Support:Sunway